Kraus Radial Caliper Bolt Kit

Description

Kraus Radial Caliper Bolt Kit

Use these kits to mount radial brake calipers to Kraus Front or Rear Radial Brake Caliper Mounts.

• 2.5mm Spacers stack to form all commonly needed spacing.
• For use with aftermarket radial calipers
• If using OEM calipers we recommend setting the caliper in place and measuring for proper spacing.
• Each kit will mount one caliper

60mm kit

• Two stainless 12 pt. ARP bolts (M10 x 1.25 x 60mm)
• 8Stackable 2.5mm Spacers.
• Allows for a total caliper spacing of 0mm to 10mm.
• Use with Kraus front radial caliper mounts for 11.5″ (292mm) Rotors
• Use withKraus Dynamoto inverted front end for 11.8″ (300mm) & 310mm rotors.

70mm kit .

• Two stainless 12 pt. ARP bolts (M10 x 1.25 x 70mm)
• 14 Stackable 2.5mm Spacers.
• Allows for a total caliper spacing of 10mm to 18mm.
• Use with Kraus front radial caliper mounts for 11.8″ (300mm) brake rotors.
• Use with any Kraus Rear Radial Caliper Mounts for 11.5 or 11.8″ rotors.
• Use with Dynamoto inverted front end for 12.6″ (320mm) or 330mm brake rotors.

80mm kit

• Two stainless 12 pt. ARP bolts (M10 x 1.25 x 80mm)
• 22 Stackable 2.5mm Spacers.
• Allows for a total caliper spacing of 20mm to 28mm
• Use with Kraus front radial caliper mounts for 310mm, 12.6″ (320mm) or 330mm brake rotors.
• Use with any Kraus rear radial caliper mount for 310mm rotors or 12.6″ (320mm) brake rotos.
• Use with KRT inverted front end for 12.6″ (320mm) or 330mm brake rotors.